Standalone Access Control

E2002-EM-ID/Mifare Keypad Standalone Access Control
Specification 
Supply Voltage: DC12V 
Working Current: less than 1000 mA 
Static current: less than 80 mA 
User capacity: 1600 Card and 200 passwords for EM-ID. 200Pcs Cards for Mifare 
Proximity distance: more than 5CM 
Support Card type: EM-ID(125Khz) or Mifare Card 
Operation Temperature: -10 C-70 C 
Operation Humidity: 10%-90%

Program method

1.Proximity Card AND password Opening Door Mode. 
*Press Key # four times, the Buzzer make long sound BI, POWER (Red), OK (Green), Mode (Yellow) is on at the same time. 
*Input 5 digits PIN (Default Password is 12345), OK (Green) is off. The machine enters Making Program Status. 
*Press key 2, MODE light (Yellow) is on, POWER (Red) and OK (Green) light are off. 
*Input 4 character password to open a door (Such as: 0008), the POWER (Red) and OK light (Green) flash. 
*Read the user card that needs log in, a sound BI will be heard, POWER light (Red) is off, OK (Green) and MODE light (Orange) are on, the user card is registered successfully. 
*Input 4 digits PIN for opening the door, OK (Green) is off, POWER (Red) is on, which showing PIN is registered. 
*Press key 7, MODE (Yellow) and POWER light (Red) are bright, OK light (Green) is off. 
*Press key 1, a short sound BI will be heard, MODE light is bright, which shows setting is successful. 
*Press Key 6 to Exit programming status. 
Opening Door Note: First punching the card, and then input the password in 30 seconds.

2.Proximity Card OR password Opening Door Mode. 
*Press Key # four times, the Buzzer makes long sound BI, POWER: (Red), OK (Green), Mode (Yellow) is on at the same time. 
*Input 5 digits PIN (Default Password is 12345), OK (Green) is off. The machine enters Making Program Status. 
*Press key 2, MODE light (Yellow) is on, POWER (Red) and OK (Green) light are off. 
*Input 4 character password to open a door (Such as: 0008), the POWER (Red) and OK light (Green) flash. 
*Read the user card that needs log in, a sound BI will be heard, POWER light (Red) is off, OK(Green) and MODE light (Orange) are on, the user card is registered successfully. 
*Input 4 digits PIN for opening the door, OK (Green) is off, POWER (Red) is on, which showing PIN is registered. 
*Press key 7, MODE (Yellow) and POWER light (Red) are bright, OK light (Green) is off. 
*Press any key except key 1, the Buzzer make a short sound BI.MODE light (Yellow) is bright; the setting for access control is card or password for opening a door. 
*Press Key 6 to Exit programming status.

3. Other Setting

Change Program Operating Password 
*Press key 1, The MODE (Yellow) light is on, POWER (Red), OK (Green) light is off. 
*Input PIN as your will (Example, 23456), the Buzzer make a short sound of BI, OK (Green) is on, POWER (Red), MODE (yellow) is on, PIN has changed successfully.  Note: The PIN should be kept; you will need it to enter the Making Program Mode next time. If PIN forgotten, please execute Machine Initial Step.

Delete the single user card and password 
*Press key 3, MODE light (yellow) is bright, POWER (Red) and OK (green) light are off. *Input 4 character user series No that needs to be deleted. (Series No on card, such as: 0008), a sound BI will be heard. This means the deletion is successful.

Delete all registered cards and passwords in the machine 
*Press key 4, BI will be heard twice. All the registered cards and passwords are deleted.

Open Door Time Setting 
*Press key 5, MODE light (Yellow) is bright, POWER (Red) and OK (Green) are off. 
*Input 2 character as the door open time (Such as: 05, means that the door open time is 5 second), sound BI will be heard twice, this means the door open time setup is successful.

Note: The default open time is 3 second