Erfid 800 Rfid reader

ERFID800 Proximity Card Reader 


  

Specification

*Wiegand 26/34, RS23 or RS485 interface

*Less than 0.2 second Response Speed

*Less than 0.5 seconds Proximity Time Distance:

*5-10cm Proximity Range

*Support EM-ID 125 KHz or Mifare 13.56MHZ Card.

*-25 C to 75 C Ambient Temperature

*10%-90% Ambient Humidity

*Built-in Antenna

*Built-in LED (Double Color LED)

*Built-in Loud Speaker (Buzzer)

*DC 12V Working Voltage

*70mA Working Current

*100 Meters Communication Distance

*Real Time Data Transfer

*Dark Grey

*80*42*12.5(mm)



Installation

 


Using + screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.

 

 

Wire Connection

Red        DC 5V-16V

Black       GND

Blue         D1

White        D0

Brown        BEEP

Green        LED

Yellow       Alarm

Notice

1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply 

2. When external Power is used, make sure sharing the power with Controller Box or using the same GND 

3. When the distance between card reader and controller is more than 50m, please use Power Line with at least 1.5 square cm Dia, or using several parallel Network wires